Code Converter: VB6 VB C# PHP Java

Code Converter: VB6 VB C# PHP Java

Converting codes Focus on upgrading VB6 to VB.Net and converting C# VB.Net, and listing many other helpful converters including PHP, java & others.

Table of consents:

Downloads

Downloads of C# & VB.Net Converters Using NRefactory v4:

Downloads of C# & VB.Net Converters Without Using NRefactory v4:

Downloads of VB6 Upgrader:

Downloads of C# & VB Helper Library & related code:

Downloads of PHP to .NET:

Downloads of Java & .NET:

Downloads of C++ to .NET:

Downloads of ColdFusion to .NET:

Before Conversion:

  • Make sure your code can be recompiled and run well before start converting.
  • For C# and VB.Net, 100% code conversion may get in many causes but not always. In many cases post
    conversion fixing is required.
  • No converters can guarantee 100% conversion.
  • For other language pairs: Make sure the target language supports your project type.
  • Please note that VB6 converting is hard work because the programing language philosophy is deferred. please see
    VB6 section later in this article

C# & VB.Net:

SharpDevelop:

Lots of C# <> VB code converters are available all almost all of them use using Refactory library form
SharpDevelop IDE to make the conversion and then make some useful post-conversion fixing.

The power of NRefactory v4 is parsing the code before the conversion; even if a keyword could take more than one
meaning it could be converted correctly because of understanding the code line before the conversion. another thing
will make the converting is possible in most cases.

About SharpDevelop

  • It’s a freeware Open Source Development Environment for dotNET.
  • It could be used to make many useful code conversions.
  • SharpDevelop IDE is the mother of NRefactory v4
    library which is the most used converting library
  • The conversion that is done using SharpDevelop IDE
    is much better.
  • It provide a wide range of code conversion C#, VB.NET, Boo, Python, Ruby

About NRefactory v4:

  • ICSharpCode.NRefactory is freely available as a part of SharpDevelop IDE v4.
  • It is a parser library for C# and VB.
  • It consists of a single Abstract Syntax Tree (AST) that can represent all constructs that are available in C# or
    VB (unlike System.CodeDom, which only represents constructs common to C# and VB).
  • By using the C# parser and a VB output visitor (or vice versa), you can do a code converter.
  • After parsing to AST, you can analyze and/or transform the AST and re-create source code from the (modified)
    AST, then re-insert the comments we saved from the parser into the output
  • For more info about NRefactory v4 please see: sharpdevelop.net and NRefactory wiki.
  • You may try samples\NRefactoryDemo in the
    SharpDevelop source code to take a look at how the AST parses source code.

About AST and Parsing:

The following example show a simple parsing proses.

Parsing

SharpDevelop IDE and C# VB converters:

 

ApplicationConversion
Technique
What to
convert
ConversionNotes
SharpDevelop IDEDeveloper IDE freewareCode & fileC#, VB.Net,
boo, Python, Ruby
VB.Net to C# ConverterUse NRefactory v4Code & fileVB.Net > C#
Convert .NETUse NRefactory v4Code onlyC# <> VB.Net
C# to VB.NET Project ConverterUse NRefactory v4ProjectsC# > VB.Net
Instant VBShare ware
Internal Converter
Code, file
& folder
Special version for
each conversion
convert between:
C#, VB.Net, C++,
Java
Very Flexible

 

 

What is in C# that has no equivalent in VB:

  • C# Fixed-size buffers and fixed statement has no equivalent in VB:
    private fixed char name[30]
  • C# fixed block has no equivalent in VB:
    Enter the fixed keyword. When used for a block of statements, it tells the CLR that the object in question
    cannot be relocated, and thus, it ends up pinning the object. Thus, when pointers are used in C#, the fixed
    keyword is used pretty often to prevent invalid pointers at runtime.
  • C# Generic indexers and properties has no equivalent in VB:
    public T this[string key] 
    { 
    	get { /* Return generic type T. */ } 
    }
    public T GetItem<T>(string key) 
    { 
    	/* Return generic type T. */ 
    }
  • C# Generic operators has no equivalent in VB:
    public static T operator +<T>(T a, T b)	
    {
    // Do something with a and b that makes sense for operator + here
    }
  • C# #undef has no equivalent in VB.
  • C# volatile/checked/unchecked/stackalloc has no equivalent in VB:
    Using the unchecked statement with constant expressions Overflow is unchecked at compile time or run time and
    the return value be deffer
  • C# unsafe block has no equivalent in VB:
    unsafe static void FastCopy ( byte[] src, byte[] dst, int count )
    {
    // unsafe context: can use pointers here
    }
  • C# extern alias has no equivalent in VB:
    It can sometimes be necessary to reference two versions of assemblies that have the same fully-qualified type
    names, for example, when you need to use two or more versions of an assembly in the same application. By using an
    external assembly alias, the namespaces from each assembly can be wrapped inside root-level namespaces named by
    the alias, allowing them to be used in the same file
    To reference two assemblies with the same fully-qualified type names, an alias must be specified on the command
    line, as follows:

    /r:GridV1=grid.dll
    /r:GridV2=grid20.dll

    This creates the external aliases GridV1 and GridV2. To use these aliases from within a program, reference them
    using the extern keyword. For example:

    extern alias GridV1; 
    extern alias GridV2;
  • C# overloading ++ or — operator in has no equivalent in VB: ++ & — can converted easily but overloading is
    not.
  • C# ?? operator has no equivalent in VB

What is in VB that has no equivalent in C#:

  • VB parameterized properties have no equivalent in C#
    Public Property MyProperty(ByVal A As String) As String
        Get
            Return 2 * A
        End Get
        Set(ByVal value As String)
            A = value / 2
        End Set
    End Property
  • VB Numeric labels, On Error, Resume Next, Continue and Err object has no equivalent in C#
    Sub Test()
        On Error Resume Next
        Err.Raise(1000)
        On Error GoTo 0
        Err.Raise(1001)
        On Error GoTo -1
        Err.Raise(1002)
        On Error GoTo EH
        Err.Raise(1003)
        Exit Sub
    EH:
        MsgBox(Err.Description)
        Resume Next
    End Sub
  • VB IIf is some who defer than if in C#.
    A = IIf(E, B, A)
  • VB ReDim Preserve has no built-in equivalent in C#
    ReDim Preserve A(9)
  • VB Select Case: switch is not as flexible as Select Case and many VB Select Case blocks cannot be converted to
    switch

    Select Case A
        Case 1 To 10
            '
        Case Is < 2 * A
            '
        Case Is > 30
            '
    End Select
  • VB Procedures local static variables has no built-in equivalent in C# but class-level private variable may used.
    Sub Test()
        Static InUse As Boolean = False
        If InUse Then Exit Sub
        'Run Once code
        InUse = True
        '
    End Sub
  • VB With has no equivalent in C#.
    With Me
        .Width = 10
        .Top = 0
    End With
  • VB Import Shared Class member is not supported in C#
    Imports WindowsApplication1.Form1
  • VB Exit try
  • VB Exit statements that not matching the immediately enclosing block.
  • VB Member names can be the same as their enclosing type but in C# can’t.
  • VB #Const can be set to any value but in C# accept constants only
    #Const C = 2 * A
  • VB MyClass has no equivalent in C# (some time using this is OK)
  • In C#, an object cannot reference itself in its class-level declarations: You cannot use this in class-level
    declarations in C#.
  • In C#, an object cannot reference its base class in its class-level declarations: You cannot use base in
    class-level declarations in C#.
  • Numeric labels are not allowed in C#: You must change the label to be a standard C# identifier.
  • VB &O has no equivalent in C#
  • VB When has no equivalent in C#
  • VB has some operator that are not present in C# and can’t be overloaded in C# in any way such as(integer
    division (VB \), Like, exponentiation (VB ^))
  • VB Method with the same name as the Class name is used for constructor in C# and can’t use for any other in C#.
  • VB integer casts convert ‘True’ to -1, but System.Convert methods convert ‘True’ to 1.

C# and VB Language Equivalents and Comparison:

  1. Language Equivalents
  2. Comparison of C# and VB
  3. Complete Comparison for
    VB.NET & C#

Using SharpDevelop as a code converter:

  1. Run SharpDevelop IDE
  2. From file menu select open – project/solution and open the project to be converted
  3. From View menu select projects
  4. In the project window select the project to be converted
  5. from project menu choose convert and then choose the target language
  6. This will convert the whole project
  7. The conversion could be done by right clicking the project icon in the project window then choose convert

SharpDevelop Points of Interest

How to covert C# code:

The code is converted using ICSharpCode.NRefactory.ParserFactory class:

Converter code in VB:

Imports ICSharpCode.NRefactory
Imports ICSharpCode.NRefactory.PrettyPrinter
Imports System.IO

Public Class CS2VB

    Public Overrides Function ConvertCode(ByVal sourceCode As String) As String        
            
            Dim specials As IList(Of ISpecial)
            Dim result As Ast.CompilationUnit
            Dim Parse_errors = ""
            Using parser As IParser = ParserFactory.CreateParser( _
                 SupportedLanguage.CSharp, New StringReader(sourceCode))
                parser.Parse()
                'this allows retrieving comments, preprocessor directives, etc. 
                '(stuff that isn't part of the syntax)
                specials = parser.Lexer.SpecialTracker.RetrieveSpecials()
                'this retrieves the root node of the result AS
                result = parser.CompilationUnit
                If parser.Errors.Count > 0 Then
                    Parse_errors = parser.Errors.ErrorOutput
                End If
            End Using

            'Now you can analyze and/or transform the AST.
            'Should you want to re-create source code from the (modified) AST, 
            'use an output visitor: 
            're-insert the comments we saved from the parser into the output
            
            Dim outputVisitor As New PrettyPrinter.VBNetOutputVisitor
            Dim astViewUnit = result
            Using SpecialNodesInserter.Install(specials, outputVisitor)
                astViewUnit.AcceptVisitor(outputVisitor, Nothing)
            End Using
            Dim outputCode = outputVisitor.Text
            'By using the C# parser and a VB output visitor (or vice versa), 
            'you can build a code converter. Of course, 
            'the real Code Converter in SharpDevelop also transforms the AST to fix cases 
            'where C# and VB semantics differ.

            Return outputCode   

    End Function
End Class/pre>

Converter code in C#:

using ICSharpCode.NRefactory;
using ICSharpCode.NRefactory.PrettyPrinter;
using System.IO;

public class CS2VB
{

    public override string ConvertCode(string sourceCode)
    {
        //var names and format is as in http://wiki.sharpdevelop.net/NRefactory.ashx

        //ICSharpCode.NRefactory is a parser library for C# and VB.
        //It consists of a single Abstract Syntax Tree (AST) 
        //that can represent all constructs that are available in C# or VB 
        //(unlike System.CodeDom, which only represents constructs common to C# 
        //and VB).
        //Please try samples\NRefactoryDemo in the SharpDevelop source code 
        //to take a look at the AST
        //To parse source code, use: 
        IList specials;
        Ast.CompilationUnit result;
        object Parse_errors = "";
        using (IParser parser = ParserFactory.CreateParser(SupportedLanguage.CSharp, new 
                StringReader(sourceCode))) {
            parser.Parse();
            // this allows retrieving comments, preprocessor directives, etc. 
            //(stuff that isn't part of the syntax)
            specials = parser.Lexer.SpecialTracker.RetrieveSpecials();
            // this retrieves the root node of the result AST
            result = parser.CompilationUnit;
            if (parser.Errors.Count > 0) {
                MessageBox.Show(parser.Errors.ErrorOutput, "Parse errors");
            }
        }
        //Now you can analyze and/or transform the AST.
        //Should you want to re-create source code from the (modified) AST, 
        //use an output visitor: 
        //re-insert the comments we saved from the parser into the output
        PrettyPrinter.VBNetOutputVisitor outputVisitor = new 
                PrettyPrinter.VBNetOutputVisitor();
        object astViewUnit = result;
        using (SpecialNodesInserter.Install(specials, outputVisitor)) {
            astViewUnit.AcceptVisitor(outputVisitor, null);
        }
        object outputCode = outputVisitor.Text;
        //By using the C# parser and a VB output visitor (or vice versa), 
        //you can build a code converter. Of course, 
        //the real Code Converter in SharpDevelop also transforms the AST 
        //to fix cases 
        //where C# and VB semantics differ.

        return outputCode;

    }
}

Demo conversion:

Partial code convert is not supported code should be in class and in method.

Demo1:

class Class1{void sub1(){
    //your code start
    int x =0;
    //your code end
}}

The result in VB

Class Class1
    Sub sub1()
        'your code start
        Dim x As Integer = 0
        'your code end
    End Sub
End Class

Demo 2:

namespace WindowsFormsApplication1{
    partial class Form1
    {
        private System.ComponentModel.IContainer components = null;
		private System.Windows.Forms.TextBox textbox1;
        private System.Windows.Forms.TextBox textbox2;

        
        protected override void Dispose(bool disposing)
        {
            if (disposing && (components != null))
            {
                components.Dispose();
            }
            base.Dispose(disposing);
        }

        private void InitializeComponent()
        {
            this.textbox1 = new System.Windows.Forms.TextBox();
            this.textbox2 = new System.Windows.Forms.TextBox();
            this.SuspendLayout();
            // 
            // textbox1
            // 
            this.textbox1.Location = new System.Drawing.Point(30, 30);
            this.textbox1.Name = "TEXTBOX1";
            this.textbox1.Size = new System.Drawing.Size(80, 20);
            this.textbox1.TabIndex = 0;
            // 
            // textbox2
            // 
            this.textbox2.Location = new System.Drawing.Point(30, 60);
            this.textbox2.Name = "textbox";
            this.textbox2.Size = new System.Drawing.Size(80, 20);
            this.textbox2.TabIndex = 1;
            this.textbox2.TextChanged += new System.EventHandler(this.textbox_TextChanged);
            // 
            // Form1
            // 
            this.AutoScaleDimensions = new System.Drawing.SizeF(6F, 13F);
            this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
            this.ClientSize = new System.Drawing.Size(284, 262);
            this.Controls.Add(this.textbox2);
            this.Controls.Add(this.textbox1);
            this.Name = "Form1";
            this.Text = "Form1";
            this.ResumeLayout(false);
            this.PerformLayout();

        }
        
        public Form1()
        {
            InitializeComponent();
        }

        private void textbox_TextChanged(object sender, EventArgs e)
        {
            string x = "";
            string X = "";
        }
    }
}

The result in VB

Namespace WindowsFormsApplication1
	Partial Class Form1
		Private components As System.ComponentModel.IContainer = Nothing
		Private textbox1 As System.Windows.Forms.TextBox
		Private textbox2 As System.Windows.Forms.TextBox


		Protected Overrides Sub Dispose(disposing As Boolean)
			If disposing AndAlso (components IsNot Nothing) Then
				components.Dispose()
			End If
			MyBase.Dispose(disposing)
		End Sub

		Private Sub InitializeComponent()
			Me.textbox1 = New System.Windows.Forms.TextBox()
			Me.textbox2 = New System.Windows.Forms.TextBox()
			Me.SuspendLayout()
			' 
			' textbox1
			' 
			Me.textbox1.Location = New System.Drawing.Point(30, 30)
			Me.textbox1.Name = "TEXTBOX1"
			Me.textbox1.Size = New System.Drawing.Size(80, 20)
			Me.textbox1.TabIndex = 0
			' 
			' textbox2
			' 
			Me.textbox2.Location = New System.Drawing.Point(30, 60)
			Me.textbox2.Name = "textbox"
			Me.textbox2.Size = New System.Drawing.Size(80, 20)
			Me.textbox2.TabIndex = 1
			AddHandler Me.textbox2.TextChanged, New System.EventHandler(AddressOf Me.textbox_TextChanged)
			' 
			' Form1
			' 
			Me.AutoScaleDimensions = New System.Drawing.SizeF(6F, 13F)
			Me.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font
			Me.ClientSize = New System.Drawing.Size(284, 262)
			Me.Controls.Add(Me.textbox2)
			Me.Controls.Add(Me.textbox1)
			Me.Name = "Form1"
			Me.Text = "Form1"
			Me.ResumeLayout(False)
			Me.PerformLayout()

		End Sub

		Public Sub New()
			InitializeComponent()
		End Sub

		Private Sub textbox_TextChanged(sender As Object, e As EventArgs)
			Dim x__1 As String = ""
			Dim X__2 As String = ""
		End Sub
	End Class
End Namespace

Conversion Cases:

Case sensitive C# to VB:

The converter will automatically rename object if needed.

Event Handler C# to VB:

The event C# handler will be converted as follows:

C#:

this.textbox2.TextChanged += new System.EventHandler(this.textbox_TextChanged);

VB:

AddHandler Me.textbox2.TextChanged, New System.EventHandler(AddressOf Me.textbox_TextChanged)

VB6 & VB.Net:

Why VB6 Upgrading is important:

Magic properties that make many programmer love VB6:

  • Compile on demand: you could choose to make the source code code be complied at debug time on demand only.
  • Edit and continue: In debug mode you not forced to restart your application after errors fix or code edit.
  • Does not need dot net framework to run.
  • COM and ole combatable.

VB 6.0 upgrading advantages

  • Supporting 64 bit
  • Faster running
  • More resources
  • Improve the maintenance of an application
  • Increase developer productivity

VB 6.0 upgrading disadvantages

  • Compile on demand will be lost.
  • The resulting application need dot net farmworker will the original one is not
  • If your application is a dynamic library; note that pre declared object is not supported in C# or VB.Net.
  • If your application is ActiveX control or ActiveX Document then there is no acceptable converter for you; manual
    code rewriting is needed.
  • The converter we save your time for converting but post conversion work is much needed.

What does pre declared object means:

I wrote a library in VB6 to be used as addin in Office VBA the user write following code when used my lib

Sub Test()
    If Not NP.File.Exists("C:\Temp.txt") Then NP.File.Create "C:\Temp.txt"
    NP.File.Move "C:\Temp.txt", "C:\Temp2.txt"
    NP.File.Copy "C:\Temp2.txt", "C:\Temp.txt"
    NP.File.Delete "C:\Temp2.txt"
    NP.Shell "C:\Temp.txt"
End Sub

The NP object is pre declared and no need to declare it in VBA In VB.Net Version of VBA Extend the user should add additional line
The user should 1st declare an object named NP before using it.

Public NP As New VBAExtend.NP
Sub Test()
    If Not NP.File.Exists("C:\Temp.txt") Then NP.File.Create "C:\Temp.txt"
    NP.File.Move "C:\Temp.txt", "C:\Temp2.txt"
    NP.File.Copy "C:\Temp2.txt", "C:\Temp.txt"
    NP.File.Delete "C:\Temp2.txt"
    NP.Shell "C:\Temp.txt"
End Sub

Before Converting:

  • It is better to install VB6 but it is not a must
  • Ensure that your application could be recompiled and run correctly.
  • Ensure that all your referred library are available and work well in the current operating system.
  • Make sure your code can be recompiled and run well before start converting.
  • No convertors can grantee the 100% conversion.
  • Make sure that the dot net language support your project type.
  • Please note the VB6 converting is a hard work because of the programing language philosophy is defer VB6

VB6 Upgrade Companion VBUC:

  • If you are familiar with upgrading VB6 then you will understand how useful this software.
  • It safe too much of the upgrade time.
  • In most time required many post conversion works.
  • It is much better than the old upgrade engine that is included in versions 2003, 2005 and 2008 of VS

What VBUC can upgrade:

  • Modules, Classes, Forms & MDIForms
  • User Controls that used in the same project on in the same group
  • Resource File

What VBUC can’t upgrade:

  • Property Page
  • Designer files (*.Dsr)
  • User Controls that used in web browser or ActiveX container
  • ActiveX Document

Before Using VBUC:

The VBUC is feather software with many option and we should study before start converting:

  • It is more simple to convert to VB.Net than C#.
  • For ActiveX choose Com Visible
  • Form options Use helper classes whenever it available
  • For making you application more like .net designed use More dot net option
  • If the above option fail use the More Automation options for less error in conversion.
  • After converting complete open your project in VS and disable all warning and switch option explicit off and
    option strict off.
  • If error is still appears try to fix them manually.
  • Once you are able to compile your project try to follow warning
  • Switch option explicit on and option strict on and follow any errors appears

VBUC Free version limitation:

It is work for project with less than 30,000 line code

VB Migration:

  • New powerful VB6 converting application.
  • If you are familiar with upgrading VB6 then you will understand how useful this software.
  • It safe too much of the upgrade time.
  • In most time required many post conversion works.
  • It is much better than the old upgrade engine that is included in versions 2003, 2005 and 2008 of VS
  • Its more simple and faster than VBUC

Properties

  • Supports most major VB6 features
  • Converting in trail software is done on the company server.
  • Fast conversion of large project.
  • .NET app will looks and behaves like the original VB6 code
  • Simple interface
  • Powerful supported libraries
  • Integrated code editor
  • staged migration is partial conversion is allowed
  • Extendibility
  • User control will be upgraded.
  • Sub Main in DLL projects & Multi-threaded components
  • Controls in VBMP’s support library expose properties and methods with same name as the original members, which
    ensures that code runs correctly even in late-bound scenarios
  • Auto-implemented properties

What VB Migration can’t upgrade

  • Property Page
  • Designer files (*.Dsr)
  • User Controls that used in web browser or ActiveX container
  • ActiveX Document

You can  see Feature Comparison
Table

Other VB6 upgrade links

totop